RETURN TO SITE

COVER

SECTION 1:

SECTION 2:

SECTION 3:

SECTION 4:

SECTION 5:

SECTION 6:

SECTION 7:

SECTION 8:

SECTION 9:

SECTION 10:

SECTION 11:

SECTION 12:

SECTION 13:

SECTION 14:

SECTION 15A:

SECTION 15B:

SECTION 16:

SECTION 17:

SECTION 18:

APPENDIX:

An Important Massage From C-Thru Industries

This room installation Sunrooms-manual is NOT intended to replace the installation training offered by C-Thru Industries, Inc. This installation training is conducted at C-Thru's Corporate Headquarters in Riverside, California. Please contact your Dealer Development Specialist to find out the dates of the next available installation training session.

C-Thru recommends that you review this Sunrooms-manual thoroughly prior to your installation. This installation Sunrooms-manual should be used as a reference tool during the room construction process. Technical and installation questions can also be addressed by C-Thru's Production Control Department. They can be reached by calling 800-287-2846.

C-Thru Industries is a material supplier only. It is the responsibility of the homeowner, contractor or dealer, building municipality, or the installers to make sure that the C-Thru room complies with the requirements of local building codes. C-Thru provides a variety of engineering for permitting purposes. Rooms designed within the scope of these engineering documents meet or exceed the 1997 Uniform Building Code, 2003 International Building Code, 2003 International Residential Code, and the 2001 Florida Building Code.

This room installation Sunrooms-manual is NOT intended to replace the installation training offered by C-Thru industries, Inc. This installation training is conducted at C-Thru's Corporate Headquarters in Riverside, California. Please contact your Dealer Development Specialist to find out the dates of the next available installation training session.

C-Thru recommends that you review this Sunrooms-manual thoroughly prior to your installation. This installation Sunrooms-manual should be used as a refernce tool during the room construction process. Technical and installation questions can also be addressed by C-Thru's Production Control Department. They can be reached by calling 800-287-2846.